Stihl Brushcutter - Starting - Stop Switch on Throttle Trigger Housing

O
n
l
i
n
e
v
e
r
s
i
o
n
-
n
o
t
f
o
r
r
e
p
r
i
n
t
•
Observe safety precautions - see
chapter "Safety Precautions".
•
Move stop switch  to 
•
Hold down the interlock lever ,
squeeze the throttle trigger  and
engage the spring lock  in the
notch (see arrow) on the throttle
trigger retainer.
•
Let go of the throttle trigger, spring
lock and interlock lever in that
order. The trigger is now in the VWDU
WLQJWKURWWOHSRVLWLRQ.
If HQJLQHLVFROG:
•
Turn the filter cover  clockwise to
&+2.( .
IfHQJLQHLVZDUP:
•
Turn filter cover  counterclockwi-
se to 581 .
Also use this setting if engine has been
running but is still cold.
•
Press transparent fuel
pump bulb at least five times
- it must be filled with fuel.
343BA031
6WDUWLQJ
6WRS6ZLWFKRQ7KURWWOH
7ULJJHU+RXVLQJ
343BA036
343BA030
343BA037
