Stihl Brushcutter - Starting - Stop Switch on Engine Housing

O
n
l
i
n
e
v
e
r
s
i
o
n
-
n
o
t
f
o
r
r
e
p
r
i
n
t
$VVRRQDVHQJLQHUXQV
If HQJLQHLVFROG
•
Hold down interlock lever  and
warm up engine for brief period
at full throttle.
•
Release the throttle trigger  and
turn filter cover to 581 so that
engine returns to idle speed.
If HQJLQHLVZDUP
•
Hold down interlock lever  and
blip the throttle trigger  to dis-
engage the spring lock  so that
the engine can return to idle speed.
7RVKXWGRZQWKHHQJLQH
Move stop switch  to the  position.
Make sure carburetor is correctly
adjusted - cutting tool must not
rotate when engine is idling.
$WYHU\ORZRXWVLGHWHPSHUDWXUHV
$OORZHQJLQHWRZDUPXS
As soon as engine runs:
•
Hold down interlock lever -
warm up the engine by running it for
about 1 minute at full throttle -
release the throttle trigger.
•
Turn the filter cover to 581 so
that engine returns to idle speed.
,IWKHHQJLQHGRHVQ¶WVWDUW
•
If you did not turn the filter cover
to 581 quickly enough after
the engine began to fire, the
combustion chamber is flooded.
•
Remove spark plug boot .
•
Unscrew and dry off the
spark plug.
•
Move stop switch to  position.
•
Hold down interlock lever and
open the throttle fully.
•
Pull the starter rope several
times to clear the combustion
chamber.
4
3BA036
343BA037
343BA038
