Stihl Brushcutter - Page 42

O
n
l
i
n
e
v
e
r
s
i
o
n
-
n
o
t
f
o
r
r
e
p
r
i
n
t
:KHQHQJLQHEHJLQVWRILUH
If HQJLQHLVFROG
•
Turn filter cover  counter-
clockwise to N
and continue cranking
until the engine runs.
If HQJLQHLVZDUP
•
Continue cranking until the engine
runs.
$VVRRQDVHQJLQHUXQV
If HQJLQHLVFROG
•
Warm up engine for brief period
at full throttle.
•
Release the throttle trigger.
•
Turn the filter cover to 581 so
that engine returns to idle speed.
If HQJLQHLVZDUP
•
Blip the throttle trigger  to dis-
engage the spring lock  so that
the engine can return to idle speed.
7RVKXWGRZQWKHHQJLQH
Move the stop switch  to .
Make sure carburetor is correctly
adjusted - cutting tool must not
rotate when engine is idling.
$WYHU\ORZRXWVLGHWHPSHUDWXUHV
$OORZHQJLQHWRZDUPXS
As soon as engine runs:
•
Warm up engine for about 1 minute
at full throttle.
•
Release throttle trigger -
and turn filter cover to 581 so that
engine returns to idle speed.
343BA042
343BA043
343BA032
