ZyAIR Wireless LAN Utility
4-2 Wireless LAN Security
Figure 4-1 ZyAIR Utility: WEP Encryption
Follow the instructions in the table to configure the WEP encryptions.
Table 4-1 ZyAIR Utility: WEP Encryption
FIELD DESCRIPTION
Encryption
Select either 64 Bit or 128 Bit from the drop-down list box to activate WEP
encryption and then fill in the related fields.
Select Disable to deactivate the WEP data encryption.
WEP Key Entry
The WEP keys are used to encrypt data before it is transmitted. The values for the keys must be set up
exactly the same on the APs or other peer ad-hoc wireless computers as they are on the ZyAIR.
Key Type
Select either the HEX or ASCII WEP key type.
To Next Page
Loading...
