FC 96, FC 111
English
15
N Always walk forwards when cutting,
do not pull the unit towards you.
N Cut at a steady pace to avoid having
to make several passes.
N Use the gunning sight (1) to line the
blade up with the edge of the bed.
The following STIHL attachments may
be mounted to the basic power tool:
Your new power tool comes with the
loop handle mounted on the drive tube,
but it must be turned and lined up to suit
your requirements.
Adjusting the Loop Handle
N Use the combination wrench to
loosen the screw (1).
N Turn the handle to the vertical
position.
Approved Power Tool
Attachments
Interchangeable
Attachment Application
BF Cultivator with pick
tines
FH 145° Power scythe
HL 0° Long reach hedge
trimmer
HL 145° Long reach hedge
trimmer
HT Pole pruner
KB (4601) Bristle brush
KW (4601) PowerSweep
Mounting the Loop Handle
To Next Page
Loading...
