Stihl FS 100 Instruction Manual

FS 100, FS 100 R
English
37
Combustion chamber
Clean after 139 hours of operation, then
every 150 hours of operation, by servic
-
ing dealer
1)
X
All accessible screws, nuts and bolts (not
adjusting screws)
Retighten X
Anti-vibration elements
Check XXX
Have them replaced by a servicing
dealer
1)
X
Cutting attachments
Visual inspection XX
Replace X
Check for secure fit XX
Metal cutting attachments Sharpen XX
Gear lubrication
Check X
Top up X
Safety information label Replace X
1)
STIHL recommends STIHL servicing dealers
The following maintenance intervals apply in normal operating conditions. The spec
-
ified intervals must be shortened accordingly when working for longer than normal
or under difficult cutting conditions (extensive dust, etc.).
Before starting work At the end of work and/or daily Whenever tank is refilled Weekly Monthly Yearly If faulty If damaged As required

Stihl FS 100 Specifications

General

Brand	Stihl
Model	FS 100
Category	Engine
Language	English