What to do if there's no electrical contact between the Stihl KMA 135 R Engine and the battery?
If your Stihl Engine isn't starting, it could be due to no electrical contact between the engine and the battery. To solve this: * Remove the battery. * Clean the electrical contacts in the battery compartment. * Reinsert the battery.
What to do if the Stihl KMA 135 R Engine battery is too hot or cold and the engine won't start?
If your Stihl Engine fails to start and you suspect the battery is the issue, it might be too warm or too cold. Remove the battery and allow it to cool down or warm up to a more suitable temperature.
How to cool down or warm up the battery of Stihl Engine?
If your Stihl Engine doesn't start, the battery might be too warm or too cold. Remove the battery and let it cool down or warm up.
What to do if the battery of Stihl Engine has a fault?
If your Stihl Engine does not start, and you suspect the battery, remove the battery and reinsert it. Then, switch on the engine. If 4 LEDs continue to flash red, do not use the battery and contact your STIHL dealer for assistance.
Why does my Stihl Power Tool KombiEngine not start?
Several factors can prevent your Stihl KombiEngine from starting. It could be due to a low battery charge (charge the battery), the battery being too hot or cold (remove the battery and allow it to cool down or warm up), a malfunction in the KombiEngine (remove the battery, clean electrical contacts, and reinsert it), the KombiEngine being too hot (remove the battery and allow it to cool down), a fault in the battery (remove and reinsert the battery), poor electrical contact (remove the battery and clean the contacts), dampness (allow the KombiEngine or battery to dry), or pressing the trigger before operating the release slide (switch on the KombiEngine correctly).
What to do if the Stihl KMA 135 R Engine or battery is damp and the engine won't start?
If your Stihl Engine is not starting, it could be because the engine or battery is damp. Allow the engine or battery to dry completely.
What if I depressed the trigger before operating the release slide on my Stihl KMA 135 R Engine?
If your Stihl Engine does not start up when switched on, it may be because the trigger was depressed before operating the release slide. To resolve this, switch on the engine as described in the User Manual.
What to do if my Stihl Power Tool KombiEngine cuts out during operation?
If your Stihl KombiEngine cuts out while you're using it, it might be overheating. Try removing the battery and allowing the KombiEngine to cool down. Alternatively, there may be an electrical fault. In this case, remove the battery and reinsert it, then switch on the KombiEngine.
Why is the runtime of my Stihl Power Tool KombiEngine too short?
If you're experiencing a short runtime with your Stihl KombiEngine, the battery may not be fully charged. Ensure you fully charge the battery. It's also possible that the battery's service life has been exceeded, meaning it's time to replace the battery.
What to do if STIHL connected app is unable to find the battery?
If the STIHL connected app can't find your battery, check if the Bluetooth® radio interface is activated on both the battery and your mobile device. If not, activate it. Also, make sure the distance between the battery and your mobile device isn't too great. Try reducing the distance.
Lists other documents and local regulations that apply to the product's use.
Defines the meaning of specific warning symbols like WARNING and NOTICE.
Explains symbols used within the text to refer to specific sections or information.
Diagram and labels identifying the main parts of the KombiEngine and battery.
Details the meaning of warning symbols to ensure user safety during operation.
Defines the product's intended purpose and power source requirements.
Specifies the user's physical, mental, and training prerequisites for safe operation.
Guidance on appropriate personal protective equipment (PPE) and clothing for safe operation.
Safety measures related to the work environment, including bystanders, flammability, and battery handling.
Criteria to ensure the KombiEngine and battery are in a safe operational state.
Instructions for safe working practices, including concentration, balance, and avoiding fatigue.
Safety guidelines for transporting the KombiEngine and battery to prevent damage or injury.
Procedures and conditions for safely storing the KombiEngine and battery.
Safety precautions to be observed during cleaning, maintenance, and repair activities.
Steps to ensure the KombiEngine is ready for use, including checks and assembly.
Instructions for fully charging the STIHL AP battery using approved chargers.
How to interpret LED indicators to check the battery's current charge level.
Explanation of battery LED indicators for charge status and potential malfunctions.
Step-by-step guide for attaching the loop handle to the KombiEngine shaft.
Instructions for mounting the loop handle along with the barrier bar.
Guidance on properly fitting and adjusting the shoulder strap for comfort and control.
Instructions for adjusting the loop handle's position for optimal user ergonomics.
Procedure for correctly inserting the battery into the KombiEngine.
Steps for safely detaching and removing the battery from the KombiEngine.
Detailed instructions on how to start the KombiEngine and operate its controls.
Procedure for safely shutting down the KombiEngine.
How to verify the functionality of the trigger, trigger lockout, and release slide.
Method for testing the battery's status using its LED indicators.
Guidance on proper handling and control based on the attached KombiTool.
How to adjust the power output and its impact on battery run time.
Steps to follow after completing work, including shutdown and cleaning procedures.
Instructions for safe transport of the KombiEngine, including securing it.
Guidelines for the safe packaging and transport of the battery.
Conditions and precautions for storing the KombiEngine safely.
Recommendations for storing the battery, including charge level and temperature.
Procedure for cleaning the KombiEngine, including its battery compartment and contacts.
Steps for cleaning and maintaining the air filter of the KombiEngine.
Simple instructions for cleaning the battery with a damp cloth.
Recommended schedule for maintenance tasks based on operating hours.
Information regarding the repairability of the KombiEngine by the user.
Information on battery servicing and repair limitations.
Guide to identifying and resolving common issues with the KombiEngine and battery.
Technical data and permitted accessories for the STIHL KMA 135 R KombiEngine.
Key specifications for the STIHL AP battery, including voltage and temperature limits.
Details on noise and vibration levels emitted by the KombiEngine during operation.
Information on the product's compliance with the REACH chemical regulation.
Lists the various STIHL KombiTools that can be attached to the KombiEngine.
Specific combinations for the FS-KM KombiTool, detailing attachments, deflectors, and carrying systems.
Overview of approved STIHL carrying systems compatible with the KombiEngine.
Information and recommendations regarding genuine STIHL spare parts and accessories.
Instructions for the proper and environmentally sound disposal of the product and its components.
Official declaration confirming the KombiEngine's compliance with EC directives.
General safety precautions for electric tools based on IEC 62841 standards.
Guidelines for maintaining a safe work environment, including cleanliness and hazard awareness.
Precautions to prevent electric shock when using electric power tools.
Measures to ensure user safety, including alertness, protective equipment, and body positioning.
Best practices for using and maintaining electric power tools to ensure safety and longevity.
Guidelines for servicing power tools by qualified personnel using identical replacement parts.
Instructions for the safe use and care of battery packs, including charging and handling.
To Next Page
General
