0458-687-0121-A
13
English
9 Removing and Fitting the Battery
9.1 Inserting the Battery
► Insert the battery (1) up to the limit stop into the battery
compartment (2).
The battery (1) engages with a click and is now locked.
9.2 Removing the Battery
► Set the KombiEngine on a level surface.
► Press both locking levers (1).
The battery (2) is released and can be removed.
10.1 Switching on the KombiEngine
► Hold the KombiEngine with your right hand by the control
handle – wrap your thumb around the control handle.
► Hold the KombiEngine with your left hand by the loop
handle – wrap your thumb around the loop handle.
► Depress the trigger lockout (1) with your hand and keep it
pressed.
► Push the release slide (2) in the direction of the loop
handle with your thumb and hold it there.
The LEDs emit light to indicate the power level used last.
► Press the trigger switch (3) with your index finger and
keep depressed.
The KombiEngine accelerates and the KombiTool runs.
The more you depress the trigger (3), the faster the
KombiTool runs.
The LEDs continue flashing for 5 seconds after the trigger
(3) and trigger lockout (1) are released after switch-on. As
long as the LEDs flash, the KombiEngine can be switched on
again without having to operate the release slide (2) once
more.
10.2 Switching the KombiEngine Off
► Release the trigger and trigger lockout.
► Wait until the KombiTool comes to a standstill.
9 Removing and Fitting the Battery
1
2
0000097033-001
2
1
0000097034-001
10 Switching the KombiMotor On/Off
To Next Page
Loading...
Need help?
General
