Stihl FS 360

10 FS 240 C, FS 260 C, FS 360 C, FS 410 C, FS 460 C-M
3.3 Drive tube assembly
Problem Cause Remedy
Drive tube assembly vibrates Flexible liner is worn
– Drive shaft is insufficiently
supported and can vibrate
Replace flexible liner
Cutting attachment out of true Resharpen cutting attachment
evenly, replace if necessary
Drive tube assembly becomes very
warm
Drive shaft not sufficiently
lubricated
Lubricate drive shaft along its entire
length – the entire length of the
flexible liner must be lubricated
Bike handle does not clamp Clamps are greasy or oily Clean clamps and bike handle
Bike handle can no longer be
adjusted
Clamps are dirty Clean clamps and bike handle