Need help?Do you have a question about the Stihl FS 40 C and is the answer not in the manual?
General| Engine Displacement | 27.2 cc |
|---|---|
| Sound Power Level | 107 dB(A) |
| Shaft Type | Curved |
| Weight | 4.4 kg |
| Drive Type | Flexible Shaft |
| Power Output | 0.8 kW |
| Cutting Swath | 23 cm |
Proper techniques for holding, balance, and emergency shutdown during operation.
Emphasizes using the correct deflector and checking the work area for hazards.
Critical safety information and procedures for refueling the trimmer.
Pre-operation checks to ensure the trimmer is assembled and in good condition.
Lists the approved cutting attachments and mowing head types.
Specific mounting procedure for the AutoCut 5-2.
Detailed steps for mounting the AutoCut C 5-2.
Specific instructions for mounting the PolyCut 6-3.
Table and explanation of correct fuel-to-oil mixing ratios.
Step-by-step guides for starting cold and warm engines.
Troubleshooting if the cutting attachment spins at idle.
Diagnosing and fixing erratic idling and acceleration problems.
Emission compliance and detailed engine technical specifications.
Details owner responsibilities, warranty coverage, and STIHL's commitment.
Explains the warranty duration and the diagnostic process for claims.
Outlines how warranty repairs are performed by authorized dealers.
Maintenance needed to uphold warranty and exclusions.
Instructions on how to initiate a warranty claim.
To Next Page
