Need help?Do you have a question about the Stihl FS 410 C-M and is the answer not in the manual?
General| Start System/Starter | Easy2Start |
|---|---|
| Handle System | Loop handle |
| Throttle Lock | Yes |
| Anti-Vibration System | Yes |
| Recommended Cutting Attachment | Grass cutting blade |
| Shaft Type | Straight shaft |
| Engine Type | 2-stroke gasoline engine |
| Displacement | 41.6 cc (2.5 cu. in.) |
Explains symbols attached to the machine.
Explains warning symbols used in the manual.
Covers warnings, notices, and engineering improvements for safe operation.
Details on protective clothing, footwear, eye, face, and hearing protection.
Instructions for safe transport and refueling procedures.
Guidelines for safe operation, including footing, stop switch, and environmental awareness.
Usage and safety for mowing heads, metal attachments, and vibration risks.
Table detailing approved combinations of cutting attachments, deflectors, and harnesses.
Steps for assembling the handlebar and control handle.
Procedures for opening, lining up, and closing the handlebar wing screw.
How to swivel the handlebar for transport and working positions.
Instructions on how to adjust the throttle cable for correct operation.
Guidance on selecting and mounting the correct deflector for cutting attachments.
Steps for safely mounting cutting attachments and guard rings.
How to ensure the cutting attachment rotates correctly.
Steps to properly secure the cutting attachment to the gearbox.
Specific instructions for mounting the Shredder Blade 270-2.
Information on mounting circular saw blades, including kits.
Instructions for changing the guard ring for specific saw blades.
Information on fuel types, STIHL MotoMix, and mixing fuel.
Precautions and steps for filling the fuel tank.
Instructions for opening, filling, and closing the fuel filler cap.
Instructions for putting on, adjusting, attaching, and detaching the harness.
Recommended hanging positions for balancing the machine with attachments.
Instructions for safely putting down the machine in an emergency.
Controls and functions for starting and stopping the engine.
Explanation of choke lever positions for starting.
Step-by-step guide for starting the engine.
General guidance on using the tool and switching off the engine.
Additional starting procedures, troubleshooting, and flooded engine steps.
Guidelines for the initial break-in period of a new machine.
Recommendations for operating the machine after break-in.
Instructions for after work, including short-term storage.
Importance of the air filter and its role in engine performance.
Steps for removing, cleaning, and replacing the air filter.
Explanation of M-Tronic system for fuel and ignition control.
How to adjust the carburetor shutter for winter to prevent icing.
Guides for setting the carburetor shutter based on ambient temperature.
How to check, clean, remove, and troubleshoot spark plug issues.
Step-by-step guide to installing the spark plug correctly.
Troubleshooting engine running issues and potential causes.
Instructions for storing the machine for extended periods.
Instructions on using files or grinders to sharpen metal cutting blades.
How to check and maintain the balance of cutting attachments.
Procedures for replacing nylon line and general head maintenance.
How to adjust nylon line feed for SuperCut, AutoCut, and TrimCut heads.
Fitting precut nylon line into PolyCut and DuroCut heads.
Replacing thermoplastic cutting blades on the PolyCut head.
User checks for handlebar clamp and movement.
Recommends dealer servicing and checks for fuel pickup body.
Information on anti-vibration elements and when to check them.
Information on the wear guard for the anti-vibration housing.
Comprehensive maintenance schedule for the machine.
Instructions to reduce wear and prevent damage to the power tool.
Lists common wear parts that may need replacement.
Diagrams identifying key components of the machine models.
Technical data for the engine of FS 360 C, FS 410 C, FS 460 C.
Technical data for the engine of FS 490 C.
Details on the ignition system, spark plug type, and electrode gap.
Information on the carburetor and fuel tank capacity.
Sound pressure and vibration levels according to ISO standards.
List of convenience features and their codes.
Guidelines for maintenance and service work, emphasizing dealer service.
Instructions for environmentally friendly disposal of the product and accessories.
Official declaration of conformity with EU directives and standards.
Official declaration of conformity with UK regulations and standards.
To Next Page
