Stihl FS 45 User Manual

FS 45, FS 46
English
15
Approved Combinations
Among other parts, the complete unit in
includes:
– Cutting attachment
– Deflector
– Handle
– Shoulder strap (special accessory
only)
Select correct combination from the
table according to the cutting
attachment you intend to use.
Cutting attachments
Mowing heads
1 STIHL AutoCut C 5-2
2 STIHL AutoCut 5-2
3 STIHL PolyCut 6-3
4 STIHL FixCut 5-2
Deflector
5 Deflector with blade for mowing
heads only (see "Mounting the
Deflector").
Handle
6 Loop handle
Harness
7 Shoulder strap may be used
Approved Combinations of Cutting Attachment, Deflector, Handle and Harness
Cutting attachment Deflector Handle Harness
546BA012 KN
1
2
6
7
5
Schnur/LINE 2
Schnur/LINE 1
3
4
Warning!
Based on the cutting attachment being
used:
Choose the proper deflector in order to
reduce the risk of injury from thrown
objects and contact with the cutting
attachment.
Make sure your unit is equipped with the
proper handle and harness in order to
reduce the risk of injury from loss of con-
trol and contact with the cutting
attachment.
Do not use rigid polymer blades, metal
cutting attachments or circular saw
blades on this unit.
Only mowing heads may be used on
loop-handled trimmers with a curved
drive tube.

Stihl FS 45 Specifications

General

Engine Displacement	27.2 cc
Power Output	0.75 kW
Cutting Diameter	380 mm
Engine Type	2-stroke
Shaft Type	Curved
Fuel Capacity	0.33 liters
Fuel Tank Capacity	0.33 liters
Cutting Width	380 mm
Engine Power	1.0 bhp
Vibration Levels Left/Right Handle	5.5/5.5 m/s²