30° angle drive
HL-KM (0')
Fa applications
in
which
an
angled cutter
baris
an advantage for horizontal cuts.
Other
special
accessories
Extension drive tube, do not use
more than one extension drive tube
Shoulder strap
Full harness
Safety glasses
STIHL gear lubricant for hedge
trimmers
STIHL gear lubricant for
brushcutters
STIHL resin solvent
Users
of
this machine may only carry out
the maintenance and service work
described
in
this user manual. All other
repairs must be carried out by a
servicing dealer.
STIHL recommends that you have.
servicing and repair work carried out
exclusively by
an
authorized STIHL
servicing dealer. STIHL dealers are
regularly given the opportunity
to
attend
training courses and are
supplied with
the necessary technical information.
When repairing the machine.
only use
replacement parts which have been
approved by
STIHL for this power tool or
are
technically identical. Only use high-
quality
replacement parts in order to
avoid the risk
of
accidents and damage
to the machine.
STIHL recommends the use
of
original
STIHL replacement parts.
Original STIHL parts can be identified by
the
STIHL part number, the
STIHL'
logo and the STIHL parts symbol
fiiI.
(the symbol may appear alone on small
parts).
English
ANDREAS STIHL AG & Co. KG
Badstr. 115
0-71336 Waiblingen
confirms that the machine described
below
Type:
Hedge trimmer
KombiTool
Make:
STIHL
Model:
HL-KM
Serjal identification:
4230
Displacement
. with KM 55: 27.2
cm
3
with KM 56
R:
27.2 cm
3
with KM 85:
25.4 cm
3
with KM
90:
28.4
cm
3
with KM
100:
31.4
cm
3
with
KM
110:
31.4 cm
3
with
KM
130:
36.3
cm
3
with
FS 55
T:
27.2
cm
3
with
FS 85
T:
25.4
cm
3
with FR 85
T:
25.4 cm
3
with FR 130
T:
36.3
cm
3
conforms to the specifications
of
Directives
2006J421EC
and
2000114JEC
and has been developed and
manufactured
in
compliance with the
following standards:.
Contact
your
STIHL dealer for more
infOfm1iit'l&ifEW\11ieg~~lr,\'IlI8tI'''~r~\lillfl'l''p\(;!'(in'"anifJHtm0\
,
accessories.
".J
..
:"'"
"",EN'·ISO>121001'EN,",74 (in,·conjunction"'"''·.4!'''
··'.d,
i
with the specified
KM,
FS
and FR
'n
~:;~~l~L;~d'~g~~Liaranteed'
sg8.'~~\;'fji~il:
power
levels
were
determined
according
I·'
to Directive 2000J14JEC, Annex V, using ;
the ISO 11094 standard. i
HL-KM 19
To Next Page
Loading...
Need help?
General
