HLA 65
English
23
Removing the battery
N Press in both locking tabs (4) at the
same time to unlock the battery (5).
N Take the battery (5) out of the
housing.
When the power tool is not in use, shut it
off so that it does not endanger others.
Secure it against unauthorized use.
N Set locking lever to ƒ
N Removing the battery
N Clean the cutting blades, check
condition and spray with STIHL
resin solvent
N Fit blade guard over the blades
N Thoroughly clean the machine,
especially the ventilation slots
N Store machine in a safe and dry
place. Protect against unauthorized
use (e. g., by children)
Battery compartment cover (special
accessory)
The cover protects the empty battery
compartment against dirt.
N After work, insert the cover (1) in the
compartment until the cover audibly
snaps into place
Battery storage
N Remove the battery from the
machine or charger
N Store in a closed, dry space and
keep in a secure location. Protect
against unauthorized use (e. g., by
children) and dirt
N Do not store backup batteries
unused – use them in alternation
For optimum service life:
N store at temperatures of
+ 10 °C (50°F) to + 20 °C (68°F)
N Store at a charge state of
approx. 30 %
Storing the charger
N Removing the battery
N Disconnect the power plug
N Store charger in a closed, dry space
and keep in a secure location.
Protect against unauthorized use
(e. g., by children) and dirt
Storing the Machine