EasyManua.ls Logo

Stihl HS 86 - Technical Specifications; Accessory Information; Maintenance and Repairs

Stihl HS 86
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27HS 86 R, HS 86 T
English / USA
EPA / CEPA:
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category A = 300 hours, B = 125 hours,
C = 50 hours
CARB:
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Extended = 300 hours,
Intermediate = 125 hours,
Moderate = 50 hours
Triebwerk
Ignition System
Fuel System
Cutting blade sharpening angle
45° to horizontal
Weight (complete unit)
Contact your STIHL dealer for
information regarding special
accessories that may be available for
your product.
STIHL single cylinder two-stroke
engine
Displacement: 1.39 cu.in
(22.7 cm
3
)
Bore: 1.34 in
(34 mm)
Stroke: 0.98 in
(25 mm)
Engine power
to ISO 8893: 0.90 bhp
(0.7 kW)
Idle speed: 2,800 rpm
Specifications
Typ: Electronic magneto ignition
Spark plug
(suppressed): Bosch USR 7 AC
Electrode gap: 0.02 in (0.5 mm)
Carburetor: All position diaphragm
carburetor with integral fuel pump
Fuel tank capacity: 15.6 oz (0.46 l)
Fuel mix: See “Fuel”
HS 86 R/30" 12.1 lbs (5.5 kg)
HS 86 T/30" 11.5 lbs (5.2 kg)
HS 86 T/40" 12.1 lbs (5.5 kg)
Special Accessories

Related product manuals