HSE 52
English
13
N Make sure you have a secure and
firm footing.
N Stand upright – hold the power tool
in a relaxed position.
N Make sure the cutting attachment is
not touching the ground or any other
objects.
N Hold the power tool with both hands
– one hand on the control handle –
one hand on the loop handle.
N Push the switch lever (1) against
the loop handle and hold it there.
N Push down the trigger switch
lockout (2), depress the trigger
switch (3) and hold them in that
position.
The machine is designed for two-hand
operation, i.e. it will run only when the
switch lever (1) and trigger switch (3)
are operated simultaneously.
N Release the trigger switch (1) and
the switch lever (2).
N During longer work breaks –
disconnect the plug from the power
supply.
N When the machine is not in use,
shut it off so that it does not
endanger others.
N Secure it against unauthorized use.
For periods of 3 months or longer
N Clean the cutting blades, check
condition and spray with STIHL
resin solvent.
N Fit the blade scabbard.
N Thoroughly clean the machine,
especially the cooling air inlets.
N Store the machine in a dry, locked
location – the blade scabbard can
be mounted to the wall for this
purpose – out of the reach of
children and other unauthorized
persons.
Switching On
To Next Page
Loading...
