HT 105, HT 134, HT 135
English
33
Anti vibration elements (rubber buffers,
springs)
Check XXX
Have replaced by servicing dealer
1)
X
Chain lubrication check X
Saw chain
Check, pay attention to sharpness XX
Checking the chain tension XX
sharpen X
Guide bar
Check (wear, damage) X
Clean and turn over XX
Deburr X
replace XX
Chain sprocket
check X
Have replaced by servicing dealer
1)
X
Safety information label replace X
1)
STIHL recommends STIHL dealers
2)
Only if there is a noticeable loss of engine power
The following intervals apply for normal operating conditions. The specified intervals
must be shortened accordingly when working for longer than normal or under difficult
cutting conditions (extensive dust, etc.).
Before starting work
At the end of work and/or
daily
Whenever tank is refilled
Weekly
Monthly
Annually
If faulty
If damaged
As required