Stihl MS 192 T - Fuel Hoses

90 MS 192 T
: Use hook 5910 893 8800 to pull
the pick-up body (1) out of the
fuel tank.
Take care not to overextend the fuel
hose.
217RA285 TG
1
: Disconnect the pick-up body (1)
from the fuel hose (2).
– Check the pick-up body and
clean or replace it if necessary.
217RA286 TG
1 2
: Slide the connectors of the
cleaned or replaced pick-up body
(1) into the fuel hose (2).
217RA291 TG
1 2
: Push the pick-up body (1) into the
tank filler port.
– The pick-up body should be
positioned at the lowest point
inside the tank.
– Reassemble remaining parts in
217RA292 TG
1
reverse order.
Remove the air filter, b 14.1
Remove the fan cover, b 9.1
Remove the intake elbow,
b 14.5
: Remove the cover (1).
217RA103 TG
1
: Push the fuel return line (1) out.
217RA300 TG
1
14.8 Fuel Hoses