Stihl MS 192 T Manual

95MS 192 T
No. Part name Part No. Use Rem.
29 Torque wrench 5910 890 0302 Screw connections (0.5 to 18 Nm)
30 Torque wrench 5910 890 0312 Screw connections (6 to 80 Nm)
31 Bit size 13 5910 893 5608 Crankshaft nut
33 Combination wrench 1129 890 3401 Spark plug 1)
35 Bit T 27 x 125 0812 542 2104 Remove and install spline socket head
screws with electric or pneumatic
screwdrivers; tighten down screws with
torque wrench
35 Bit T 20 x 125 0812 542 2041 Remove and install spline socket head
screws with electric or pneumatic
screwdrivers; tighten down screws with
torque wrench
36 Screwdriver T 20 x 100 5910 890 2301 1)
37 Screwdriver Q-SW8x200 5910 890 2420 Carburetor nuts 1)
38 Stud puller 5910 893 0501 Remove rail mounting studs
41 Crimping pliers 5910 890 8210 Cable ties, cable lugs, etc.
42 Assembly pin 1114 893 4700 Remove and install the piston pin
Remarks:
1) Use only for releasing.

Stihl MS 192 T Specifications

General

Engine Displacement	30.1 cc
Recommended bar length	30 cm
Engine Power	1.3 kW
Guide Bar Length	30-35 cm
Fuel Capacity	0.27 liters
Chain Oil Capacity	0.22 liters
Chain pitch	3/8"