Stihl MS 200 T User Manual

35MS 200 T
English / USA
General information
The carburetor comes from the factory
with a standard setting.
This setting provides an optimum fuel-air
mixture under most operating
conditions.
With this carburator it is only possible to
adjust the engine idle speed within fine
limits!
Standard setting
: Shut off the engine.
: Turn high speed screw (H)
counterclockwise as far as stop
(max. 3/4 turn).
: Set the low speed screw (L) to one
full turn up.
Adjustment for operation at high
alitude or at sea level
A slight correction of the setting may be
necessary if engine power is not
satisfactory when operating at high
alitude or at sea level:
: Check the air filter and clean it if
necessary.
: Warm up the engine.
At high alitude
: Rotate the high speed screw (H)
clockwise (leaner) no further than
stop.
At sea level
: Rotate the high speed screw (H)
counterclockwise (richer) no further
than stop.
Adjusting the carburetor
142BA082 KN
H
L
LA
3/4
1

Stihl MS 200 T Specifications

General

Engine Power	1.7 kW
Displacement	35.2 cm³
Fuel Capacity	0.31 L
Chain Oil Capacity	0.22 L
Oilomatic Chain Gauge	1.3 mm
Oilomatic Chain Pitch	3/8"
Chain Pitch	3/8"
Guide Bar Length	30 cm