39MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
English
Models with Easy Start
System
: Prime the fuel system by pressing
the fuel pump bulb about five times.
Press a few times more if you are
starting for the first time after refilling a
dry tank.
: Press in the button to open the
decompression valve.
The decompression valve closes as
soon as the engine fires.
: For this reason you must press in
the button before each starting
attempt.
All Models
: Observe safety precautions.
: Push hand guard (1) forward:
The chain is now locked.
: Press down trigger interlock (2) and
squeeze throttle trigger (3) at the
same time.
Set Master Control lever to:
for cold start l
for warm start n
(even if engine has been running
but is still cold).
Starting / Stopping
the Engine
135BA027 KN
135BA015 KN
2
1
208BA000 KN
0
3
To Next Page
Loading...
