Stihl MS 210 - Carburetor; Chain lubrication; Cutting Attachment; Chain Sprocket and Guide Bar

65MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
English
Carburetor
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity
0.47 l (470 cm
3
)
Chain lubrication
Fully automatic speed-controlled rotary
piston oil pump. Additional manual oil
flow control.
Oil tank capacity
0.20 l (200 cm
3
)
Weight
Dry, without bar and chain
Cutting Attachment
STIHL cutting attachments complying
with CSA Standard CAN 3-Z 62.3:
MS 210:
Chain sprocket:
6- or 7-tooth for 3/8" P pitch
Guide bar:
for 3/8" P (9.32 mm) pitch
Rollomatic with sprocket nose
12, 14 or 16 in (30, 35 or 40 cm)
Oilomatic chain:
3/8" (9.32 mm) Picco-Micro
(63 PM, 63 PM1, 63 PMC3)
MS 230, MS 250:
Chain sprocket:
7- or 8-tooth for 0.325" pitch
Guide bar:
Rollomatic with sprocket nose
for 0.325" (8.25 mm) pitch
14, 16 or 18 in (35, 40 or 45 cm)
Oilomatic chain:
0.325" (8.25 mm) Rapid-Micro
(23 RS, 23 RM, 23 RMC, 23 RMC3)
Other cutting attachments complying
with CSA Standard CAN 3-Z 62.3 are
available (see section CSA Standard
Z 62.3 and "Chain Leaflet" inside chain
box or contact your local STIHL dealer).
Please ask your STIHL dealer to
properly match your powerhead with the
appropriate bar/chain combinations to
reduce the risk of kickback injury.
MS 210 4.4 kg
MS 210 C 4.5 kg
MS 230, MS 250 4.6 kg
MS 230 C, MS 250 C 4.7 kg
MS 250 C ErgoStart 4.9 kg