99MS 171, MS 181, MS 211
In
No. Part Name Part No. Application Rem.
17 Puller 5910 890 4400 Removing oil seals 1
- Jaws (No. 3.1 profile) 0000 893 3706 Removing oil seal(s) 1
- Jaws (No. 4 profile) 0000 893 3711 Removing oil seal(s) 1
18 Press sleeve 1123 893 2400 Installing oil seal
19 Installing sleeve 1118 893 4602 Protects oil seal at clutch side
20 Assembly drift 1110 893 4700 Removing and installing piston pins
21 Installing tool 10 5910 890 2210 Installing hookless snap rings
in piston
22 Assembly tube 1117 890 0900 Attaching clutch springs
23 Stud puller M8 5910 893 0501 Removing bar mounting studs
24 Installing tool 0000 890 2201 Installing rope guide bushing
25 Installing tool 1116 893 4800 Rewinding rewind spring
26 Hook 5910 893 8800 Removing pickup body
27 Torque wrench 5910 890 0302 0.5 to 18 Nm
28 Torque wrench 5910 890 0312 6 to 80 Nm
29 Screwdriver bit, T 27 x 125 0812 542 2104 Removing and installing Torx screws
with electric or pneumatic screwdrivers;
tighten down screws with torque
wrench
30 T-handle screwdriver, T 27 x 150 5910 890 2400 IS-P screws (4 mm)
31 Crimping tool 5910 890 8210 Attaching connectors to electrical wires
32 Pliers DIN 5254-A 19 0811 611 8380 Removing and installing external
circlips
Remarks:
1) Use for releasing only.
To Next Page
Loading...
Need help?
General
