Stihl MS 280 C User Manual

32
English / USA
MS 280 C
: Disengage the chain brake: Pull
hand guard (9) towards the front
handle.
: Turn the guide bar so that the
tensioning gear is facing you.
: Fit the chain over the sprocket (10).
The long collar screw (11) in the
center engages the hole in the
tensioning gear. The heads of the
two short collar screws locate in the
guide bar slot.
: Press down the throttle trigger
interlock lever to disengage the
chain brake.
: Make sure the drive link tangs
engage the bar groove (see arrow)
and then rotate tensioning gear
counterclockwise as far as stop.
133BA032 KN
9
11
10
133BA033 KN
133BA034 KN

Stihl MS 280 C Specifications

General

Brand	Stihl
Model	MS 280 C
Category	Chainsaw
Language	English