Stihl MS 400 C-M User Manual

19.4 Noise and Vibration Data
–
Sound pressure level L
p
measured according
to ISO 22868: 107 dB(A) K-value (uncertainty)
for noise pressure level is 2 dB(A).
–
Sound power level L
w
measured according to
ISO 22868: 118 dB(A) K-value (uncertainty)
for sound power level is 2 dB(A).
–
Vibration level a
hv
measured according to
ISO 22867:
–
Front handle (handlebar): 3.5 m/s² K-value
(uncertainty) for vibration level is 2 m/s².
–
Rear handle: 3.5 m/s² K-value (uncertainty)
for vibration level is 2 m/s².
For further details on compliance with Vibration
Directive 2002/44/EC visit www.stihl.com/vib.
19.5 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
19.6 Exhaust Emissions
The CO
2
value measured in the EU type approval
procedure is specified at www.stihl.com/co2.
The measured CO
2
value was determined on a
representative engine in accordance with a
standardized test procedure under laboratory
conditions and does not represent either an
explicit or implied guarantee of the performance
of a specific engine.
The applicable exhaust emission requirements
are fulfilled by the intended usage and mainte‐
nance described in this instruction manual. The
type approval expires if the engine is modified in
any way.
20 Bar and Chain Combinations
20.1 STIHL MS 400 C-M Chainsaw
Pitch Drive link
gauge/groove
width
Length Guide bar Nose
sprocket
teeth
Number of
drive links
Saw chain
3/8” 1.6 mm
40 cm
Rollomatic E
11 60
36 RS (Type
3621)
36 RS3 (Type
3626)
36 RM (Type
3652)
36 RM3 (Type
3664)
36 RD3 (Type
3683)
Rollomatic ES
45 cm
Rollomatic E
11 66
Rollomatic ES
50 cm
Rollomatic E
11
72
Rollomatic ES
Rollomatic ES
Light
Duromatic -
55 cm Rollomatic ES 11 76
63 cm
Rollomatic E
11 84
Rollomatic ES
Rollomatic ES
Light
The cutting length of a guide bar depends on the chainsaw and the saw chain being used. Actual cut‐
ting length of a guide bar may be less than the specified length.
21 Spare Parts and Accesso‐
ries
21.1 Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
English 20 Bar and Chain Combinations
28 0458-788-0121-B

Stihl MS 400 C-M Specifications

General

Idle speed	- RPM
Motor type	2-stroke motor
Chain pitch	3/8 \
Blade length	500 mm
Product color	Black, Grey, Orange
Automatic oiling	Yes
Engine displacement	66.8 cm³
Power source	Gasoline
Sound power level	118 dB
Vibration emission	3.5 m/s²
Sound pressure level	107 dB

Weight and Dimensions

Weight	5800 g