Stihl MS 462 - User Manual

48 pages

Save Page as PDF

To Next Page

STIHL MS 462

Instruction Manual

Main Page

Questions and Answers

C
Cody HoltJul 29, 2025
Why Stihl chainsaw engine does not start?
- K
  kwarrenJul 29, 2025
  The Stihl chainsaw engine might fail to start due to several reasons. It could be due to insufficient fuel, in which case you should mix fuel and refuel the chainsaw. Another cause might be a flooded engine, requiring you to clear the combustion chamber. Also, if the carburetor is too hot, allow the chainsaw to cool down. If your chainsaw has a manual fuel pump, depress it at least 10 times before starting. Finally, the carburetor may be iced up, so allow the saw to warm up to +10°C.
M
Michelle JacksonAug 14, 2025
What to do if Stihl chainsaw chain does not rotate when throttle is opened?
- J
  jonathan43Aug 14, 2025
  If the Stihl chainsaw chain doesn't rotate when the throttle is opened, it could be due to a few reasons. First, check if the chain brake is engaged and disengage it. Another possibility is that the chain is over-tensioned, in which case you should tension the chain properly. Lastly, the bar nose sprocket might be blocked, so clean it with STIHL resin solvent.

Summary

Introduction and Overview

Introduction to the STIHL MS 462

Welcome message, product quality, and dealer support information for new users.

Chainsaw Components and Symbols

Identification of chainsaw parts and explanation of relevant symbols.

Safety Precautions

General Safety Warnings and Signs

Explains warning signs, intended use, and operator qualifications.

Personal Protective Equipment and Work Area Safety

Guidelines on clothing, equipment, and maintaining a safe work environment.

Chainsaw Safe Condition and Fuel Handling

Ensuring the chainsaw is safe and covers hazards of fuel mixture and refueling.

Safe Working Practices and Reactive Forces

Details safe techniques for sawing, limbing, felling, and managing kickback.

Transport, Storage, and Cleaning Safety

Safe procedures for moving, storing, and cleaning the chainsaw to prevent injury.

Preparing and Assembling the Chainsaw

Preparing the Saw for Operation

Checklist of essential steps before starting the chainsaw.

Assembling the Chainsaw Components

Instructions for mounting/removing the bar and chain, tensioning, and filling oil.

Chain Brake Operation and Fuel Management

How to operate the chain brake and safe fuel mixing/refueling.

Operating the Chainsaw

Seasonal and Altitude Adjustments

Adjusting the saw for winter/summer operation and high altitudes.

Oil Feed and Chainsaw Control

Adjusting oil feed, and proper techniques for holding/controlling the saw.

Cutting Techniques

Instructions for sawing, limbing, and felling trees safely and effectively.

Post-Operation, Maintenance, and Troubleshooting

Finishing Work, Transport, and Storage

Steps after use, cleaning, and proper storage of the chainsaw.

Chainsaw Cleaning and Maintenance

Detailed instructions for cleaning components and performing maintenance tasks.

Troubleshooting Chainsaw Issues

Identifying and resolving common malfunctions with the chainsaw's operation.

Specifications and Compliance Information

Technical Specifications and Combinations

Detailed specs for the MS 462 and compatible bar/chain combinations.

Spare Parts, Disposal, and Declarations

Information on accessories, environmental disposal, and EC conformity.

Stihl MS 462 Specifications

General

Displacement	72.2 cc
Power-to-Weight Ratio	1.5 kg/kW
Weight (without cutting equipment)	6.0 kg
Fuel Capacity	0.73 l
Chain Oil Capacity	0.36 l
Vibration Level (left/right)	4.8/3.6 m/s²
Chain Pitch	3/8"
Engine Power	4.4 kW
Guide Bar Length	50-63 cm (20-25 in)