Stihl MS 462 User Manual

0458-786-0121-A
26
English 11 Operating the Saw
► Pull out the shutter (3).
► Hold the shutter (3) with the symbol (4) pointing in the
direction of the saw.
► Push the shutter (3) into the guide as far as stop.
You will feel it engage.
► Place the shroud (2) in position.
► Rotate the shroud fasteners (1) clockwise until you hear a
click.
The shroud fasteners (1) are locked.
11.3 Adjusting Carburetor for Operation at High
Altitude
If you use the chainsaw at high altitude, the engine will not
deliver optimum power. The carburetor setting can be
adjusted to obtain optimum engine power.
► Start the engine and disengage the chain brake.
► Warm up the engine by opening and closing the throttle for
about 1 minute.
NOTICE
If the chainsaw is again used at a low altitude, the engine
may overheat.
► Carry out the standard setting.
► Rotate the high speed screw H clockwise until the engine
delivers optimum power.
11.4 Adjusting Carburetor for Cutting at
Temperatures Below –10°C
The engine will not accelerate properly if the chainsaw is
used at temperatures below –10°C. The carburetor can be
adjusted to obtain normal engine acceleration in such
conditions.
► Start the engine and disengage the chain brake.
► Warm up the engine by opening and closing the throttle for
about 1 minute.
3
4
0000-GXX-3486-A0
0000-GXX-3132-A0
H

Stihl MS 462 Specifications

General

Displacement	72.2 cc
Power-to-Weight Ratio	1.5 kg/kW
Weight (without cutting equipment)	6.0 kg
Fuel Capacity	0.73 l
Chain Oil Capacity	0.36 l
Vibration Level (left/right)	4.8/3.6 m/s²
Chain Pitch	3/8"
Engine Power	4.4 kW
Guide Bar Length	50-63 cm (20-25 in)