EasyManua.ls Logo

Stihl MS 441 C - Removing the Air Filter; Cleaning Standard Filter

Stihl MS 441 C
134 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
44
English / USA
MS 441 C
STIHL filters (standard and HD) have a
long service life when kept in a dry
condition.
: Always use STIHL filters in
dry condition.
Dirty air filters reduce engine power,
increase fuel consumption and make
starting more difficult.
: Use the combination wrench to
open the fasteners (1) in the
direction of the arrows.
: Remove the carburetor box
cover (2).
: Loosen the nut (3) in the direction of
the arrow.
: Pull off the filter.
If there is a noticeable loss of engine
power:
: Knock the filter out on the palm of
your hand or blow it out with
compressed air from the inside
outward.
In case of stubborn dirt or sticky filter
fabric:
: Wash the filter in a fresh, non-
flammable solution (e.g. warm
soapy water) and then dry.
: Do not impregnate the standard
filter with oil.
Always replace a damaged filter.
: Refit the filter.
Removing the Air Filter Cleaning Standard Filter
137BA013 KN

Related product manuals