57MS 441 C
English / USA
1)
STIHL recommends that this work
be done by a STIHL servicing dealer
2)
see “Chain brake“
Maintenance Chart
Please note that the following maintenance intervals apply for normal
operating conditions only. If your daily working time is longer than normal or
cutting conditions are difficult (very dusty work area, resin-rich wood,
tropical wood etc.), shorten the specified intervals accordingly. If you only
use the saw occasionally, extend the intervals accordingly.
before
starting work
after finishing
work or daily
after each
refueling stop
weekly
monthly
every 12 months
if problem
if damaged
as required
Complete machine
Visual inspection (condition, leaks)
XX
Clean
X
Throttle trigger, trigger interlock, Master
Control
Check operation
XX
Chain brake
Check operation
XX
Have checked by servicing dealer
1) 2)
X
Pickup body/filter in fuel tank
Check
X
Clean, replace filter element
XX
Replace pickup body
XXX
Fuel tank Clean
X
Chain oil tank Clean
X
Chain lubrication Check
X
Saw chain
Inspect, also check sharpness
XX
Check chain tension
XX
Sharpen
X
Guide bar
Check (wear, damage)
X
Clean and turn over
X
Deburr
X
Replace
XX
Chain sprocket Check
X
Air filter
Clean
XX
Replace
X
Anti-vibration elements
Inspect
XXX
Have replaced by servicing dealer
1)
X
To Next Page
Loading...
Need help?
General
