62
English / USA
MS 441 C
Since new bar/chain combinations may
be developed after publication of this
manual, ask your STIHL dealer for the
latest STIHL recommendations.
Other bars and chains available for this
powerhead are:
STIHL yellow-labeled bars:
For 3/8" pitch:
Rollomatic "S" with sprocket nose
16, 18, 20, 24, 28, 30, 32 or 36 in
(40, 45, 50, 63, 70, 75, 80 or 90 cm)
Duromatic with stellite tipped nose
16, 18, 20 or 24 in
(40, 45, 50 oder 63 cm
STIHL yellow-labeled chains:
For 3/8" pitch:
Rapid-Micro (33 RM, 36 RM, 33 RMF),
Rapid-Super (33 RS, 33 RS , 36 RS,
36 RS , 33 RSLK, 36 RSLK, 33 RSFK,
33 RSLFK, 36 RSLFK, 36 RSLHK).
8-tooth for 3/8" pitch
(Rimsprocket)
Contact your STIHL dealer for
information regarding special
accessories that may be available for
your product.
Please enter your saw model, serial
number as well as the part numbers of
the guide bar and saw chain in the
spaces provided. This will make
re-ordering simpler.
The guide bar and saw chain are subject
to normal wear and tear.
When purchasing these parts, always
quote the saw model, the part numbers
and names of the parts.
Model
Serial number
Guide bar part number
Chain part number
For recommended STIHL reduced
kickback cutting attachments
see section “Specifications“
of this Owner’s Manual.
Special Accessories Ordering Spare Parts
To Next Page
Loading...
