18 Chain and Bar Manual
3.9.4 RAPID
TM
Micro
TM
Spezial
(RMS)
Low vibration semi-chisel chain
Cutter
Features a shortened top plate and
a forward sloping tail. Feed effort is
greatly reduced when boring and
cutting because the cutting edge is
not pushed out of the cut.
Function
Reduced vibrations as with
RAPID
TM
Micro
TM
.
Depth gauge
as RAPID
TM
Micro
TM
Applications
Exclusively for use in combination
with STIHL Duromatic C bars for
cutting work where frequent use is
made of the bar nose. Special saw
chain for wood carvers and
arborists.
Maintenance
as RAPID
TM
Micro
TM
Color code
yellow
Chain type
1/4" .325" 3/8" 3/8"P
.050" 3661
3.9.5 RAPID
TM
Super
(RS)
Full chisel chain
Cutter
Razor-edged, square shape –
high performance chain.
Depth gauge
Forward projecting depth gauge
reduces kickback and makes this a
smooth running chain.
Applications
Forestry industry, for felling, bucking
and limbing in medium to big stands
on medium to high powered
machines.
Maintenance
Resharpening is accomplished with
a round file with file holder, a filing
tool or electric chain grinder.
Color code
yellow
Chain type
.325" 3/8" 3/8"P .404"
.063" 3946
3.9.6 RAPID
TM
Super
(RS)
Low vibration full chisel chain
Cutter
Razor-edged, square shape –
high performance chain.
Depth gauge
Forward projecting depth gauge
reduces kickback and makes this a
smooth running chain.
Function
The bottoms of the cutters and tie
straps slope upwards to the rear –
this clearance allows the cutters to
rock back slightly and thus produce
a shock absorbing effect – very low
vibrations and high cutting capacity.
Applications
Combines excellent cutting capacity
and convenience. Meets highest
performance requirements of
professional users in forestry
industry.
Felling, bucking and limbing in
medium to big stands on medium to
high powered machines.
Maintenance
as RAPID
TM
Super
Color code
yellow
Chain type
.325" 3/8" 3/8"P .404"
.050" 3637 3623
.058" 3638 3622
.063" 3639 3621
To Next Page
