40 Chain and Bar Manual
Narrow radius bar nose
(up to 10 teeth):
–Reduced kickback
–Average plunge cutting
performance
– Sprocket bearing mounted with
4 rivets
Applications:
All around use in agriculture and
construction industry, including
small wood harvesting and limbing
in the forestry industry on machines
up to about 3.5 kW.
Wide radius bar nose
(11 or more teeth):
–Higher kickback tendency
–High plunge cutting performance
–Large sprocket bearing mounted
with 6 rivets
Applications
Demanding professional use in
logging and bucking on medium to
high powered machines of more
than 3.5 kW.
4.2.5 Rollomatic E Light
The body of the "Light" consists of
three hollowed-out steel plates
which are welded together. The
cavities are filled with fiberglass-
reinforced polyamide in an injection
molding process.
Compared to the Rollomatic
Standard, the Rollomatic E Light
weighs 30% less and offers good
strength.
Guide bar rails are induction
hardened and the nose sprocket is
replaceable.
Applications:
Limbing and tree surgery.
4.2.6 Rollomatic E Mini
Special version of Rollomatic E with
very slim profile and groove width of
.043" (1.1 mm) exclusively
designed for use with the PICCO
TM
Micro
TM
Mini chain.
Applications:
General purpose cutting on electric
saws, gasoline saws and pole
pruners up to 1.5 kW.
Made in Germany
689RA206 KN
To Next Page
Loading...
