EasyManua.ls Logo

Stihl SEA 20 - Finishing Work and Emptying Container

Stihl SEA 20
136 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
0458-006-9621-A
45
English
11 Working with the Hand Vacuum
11.1 Holding and guiding the hand vacuum
Hold and guide the hand vacuum with one hand on the
control handle (1) and wrap you thumb around the control
handle.
11.2 Picking up Dust and Dirt
Switch on the hand vacuum.
Hold the hand vacuum with one hand on the control
handle and pick the material up either directly or via an
attached accessory.
For optimum performance, observe the recommended
temperature ranges, @ 18.6.
11.3 Activating and Deactivating the Power Lock
Switch on the hand vacuum.
Depress the power lock button (2).
This locks the suction force. You can let go of the trigger.
To deactivate the power lock, depress the trigger (1).
12.1 When Work is Finished
Switch off the hand vacuum and remove the battery.
If the hand vacuum is wet: Leave the hand vacuum to dry.
If the battery is wet: Leave the battery to dry.
Clean the hand vacuum.
Clean the battery.
12.2 Emptying the Container
Switch off the hand vacuum and remove the battery.
11 Working with the Hand Vacuum
1
0000098878_001
12 After Finishing Work
2
1
0000098877_001

Table of Contents

Related product manuals