4 Use
Handling the battery
Vertical output battery
Removing/replacing the battery
For the maintenance of the batteries, make
sure that the capacity of the equipment used
(hoist, slings, hooks, trolley, mobile carrier) is
sufficient with relation to the battery weight.
When fitting a replacement b
attery, it must
have specifications identi
cal to the original:
weight, compartment dimen
sions, voltage,
capacity and connectors. R
efer to the plate
on the truck for the accepta
ble minimum and
maximum weights.
CAUTION
The battery is a heavy, fragile component, which
must be handled with care. It is recommended to
wear gloves.
CAUTION
When the forks are descending, do not place your
feet below the bottom fork plate.
CAUTION
When handling the locking system and operating
the battery, never place your fingers close to mo-
ving parts to avoid risk of trapping.
CAUTION
Before setting off in the truck, make sure the battery
is securely locked in place (catch in lowered posi-
tion)
70
1170 801 15 09 [EN]
To Next Page
