Stima VP2 EVOLUTION XL

Need help?

Do you have a question about the Stima VP2 EVOLUTION XL and is the answer not in the manual?

Summary

Installation and Electrical Requirements

Installation Environment

Electrical Connection Safety

Control Panel Layout

Oven Usage - Initial Preparation

Pre-heating Procedure

Remove protective film and pre-heat the oven for at least one hour before first use.

Oven Usage - Operation Modes

Using Levels and Timers

Instructions for selecting oven levels, starting timers, and proper handling during operation.

Oven Usage - Monitoring and Standby

Timer Display, Reset, and Standby

Programming - Factory Settings

Default Temperature and Timer Values

Details of the oven's factory-programmed temperatures and timer durations.

Programming - Upper Temperature

Adjusting Upper Chamber Temperature

Step-by-step guide to modify the temperature setting for the upper cooking chamber.

Programming - Lower Temperature

Adjusting Lower Chamber Temperature

Step-by-step guide to modify the temperature setting for the lower cooking chamber.

Saving Temperature Settings

Programming - Timer Settings

Setting Cooking Timer Durations

Instructions on how to change the pre-programmed timer durations for each button.

Programming - Saving and Exiting

Saving Timer Settings and Exit

Routine Cleaning and Maintenance

Filter Replacement

Troubleshooting Common Issues

Power and Display Problems

Performance and Temperature Issues

Safety Symbols and Warnings