USE
BEFORE USING THE OVEN, REMOVE THE PROTECTIVE FILM COVERING THE STEEL AND MAKE SURE
THERE IS NO PACKAGING RESIDUE INSIDE THE COOKING CHAMBER.
TURN ON AND LEAVE THE OVEN RUNNING FOR AT LEAST ONE HOUR BEFORE INTRODUCING FOOD.
TURN ON THE OVEN BAKED ON SITE GENERAL OWN SWITCH (ON THE BACK NEAR 'THE POWER CORD IN
THE MODEL "VP / 2 EVOLUTION"; ON THE FACE UNDER THE KEYBOARD IN MODELS "VP / 2 XL
EVOLUTION" AND "VP / 2 EVOLUTION 17.7 ")
WELCOME WILL BE DISPLAYED FOR SEVERAL SECONDS.
TO HEAT THE OVEN, PRESS THE 2 START BUTTONS ON THE CONTROL PANEL
THE FOLLOWING APPEARS ON THE DISPLAY
ABOUT 30 MINUTES LATER, OK WILL BE DISPLAYED BOTH ABOVE AND BELOW
27
To Next Page
Loading...