RECEIVING THE OVEN
OPEN THE PACKAGING AND PERFORM THE FOLLOWING CHECKS:
VERIFY THAT THE USER MANUAL IS PRESENT AND MAKE IT AVAILABLE TO THE OPERATORS.
EVERY OPERATOR IS REQUIRED TO READ IT CAREFULLY, ESPECIALLY THE PART REGARDING SAFETY
RULES, BEFORE OPERATING THE OVEN.
MAKE SURE THAT THE DATA SHOWN ON THE PLATE LOCATED ON THE BACK OF THE OVEN IS
COMPATIBLE WITH THE ELECTRICAL SYSTEM ON THE PREMISES.
BEFORE OPERATING THE OVEN, MAKE SURE THAT IT IS NOT DAMAGED.
REMOVE THE PROTECTIVE MATERIAL FROM THE INSIDE AND OUTSIDE OF THE CHAMBER.
PACKAGING
DO NOT THROW THE PACKAGING MATERIALS AWAY, THEY CAN BE USEFUL FOR TRANSPORTING THE
OVEN AND PERFORMING TECHNICAL INTERVENTIONS THAT CANNOT BE PERFORMED ON-SITE.
THE PACKAGING MATERIALS MUST BE DISPOSED OF IN CONFORMITY WITH THE LAW.
NOTICES
THE OVEN MUST ONLY BE USED BY PERSONS WHO HAVE CAREFULLY READ THE CONTENTS OF THIS
MANUAL.
THIS EQUIPMENT IS NOT DESIGNED FOR HOME USE AND MUST ONLY BE USED IN A PROFESSIONAL
SETTING.
KEEP THE OVEN OUT OF THE REACH OF CHILDREN.
THE OVEN CAN ONLY BE USED FOR HEATING OR COOKING FOOD AND FOR THIS REASON ITS USE FOR
OTHER PURPOSES IS NOT RECOMMENDED.
PERIODICALLY CHECK THE POWER CORD - A DAMAGED CORD IS VERY DANGEROUS.
WHEN INSERTING OR REMOVING FOOD PRODUCTS, ALWAYS WEAR HEAT-PROTECTIVE GLOVES AND USE
THE APPROPRIATE TOOLS.
DO NOT USE THE OVEN FOR MORE THAN FOUR HOURS IN A ROW.
ANY ADJUSTMENT, MAINTENANCE OR REPAIR WORK MUST BE PERFORMED BY SPECIALIZED TECHNICAL
PERSONNEL.
DO NOT UNPLUG THE OVEN FROM THE ELECTRICAL SYSTEM OR TURN THE MAIN SWITCH OF THE
MACHINE (BACK IN THE MODEL VP2 EVOLUTION ; FRONT MODELS VP2 EVOLUTION 17.7 AND VP2
EVOLUTION XL) TO THE 0 POSITION UNTIL THE TEMPERATURE IN BOTH CHAMBERS IS BELOW 60°.
THE COMPANY IS NOT RESPONSIBLE FOR PERSONAL INJURY OR PROPERTY DAMAGE CAUSED BY
THE IMPROPER USE OF THE OVEN OR THE FAILURE TO OBSERVE THE INSTRUCTIONS IN THIS
MANUAL.
24
To Next Page
Loading...