- 19 -
MicroCurrent Mode :
FREQUENCY (Hz) (P35)
Treatment Timer (min) (P34,P35)
IFT Mode (P36-P39) :
FREQUENCY (Hz)
Treatment Timer (min)
Press these keys to increase or decrease the
value of the parameter, which has been selected
by MENU key.
Press these keys to adjust the intensity of channel
1 and channel 2. Left side is for channel 1; right
side is for channel 2.
Pause key: Press this key to make the unit pause;
to continue treatment, press and hold down this
key again.
For TENS preset modes (Prog 2- Prog 13), if a
preset mode is working, press this key to skip a phase
(sub-programs Ⓐ Ⓑ Ⓒ). For EMS preset and manual
modes (Prog 22- Prog 33), if a preset mode is working,
press this key to choose the treatment area.
Press and hold this key for at least 3 seconds to
LOCK or UNLOCK parameters. When the unit is locked,
only intensity and treatment timer can be adjusted.
The symbol displayed on the LCD screen indicates
that the unit is locked.
To Next Page
Loading...