Stinger Quad-Aer - Operator Controls and Movement

10
Unit Operaon
1. Put the operator plaorm down! Step on the plaorm care-
ful not to hit the foot switch. DO NOT OPERATE UNIT WITH
THE PLATFORM IN THE UP LOCKED POSITION! Serious bodily
harm can occur.
2. Release the parking brake as shown in gure 10. Tire dam-
age can occur if the parking brake is not released.
3. Push both steering controls forward to move the unit for-
ward. The more pressure applied, the greater the speed.
4. Pulling back on both steering controls will put the unit in
reverse.
5. Reduce the speed of the le or right steering control while
moving forward or backward to turn le or right.
6. Always set parking brake before stepping o of or turning
o the unit.
Figure 10