Stinger Quad-Aer - SeedBox Usage and Display Codes

13
Usage
1. Remove the ignion key.
2. Fill the hopper with seed and fasten lid down.
3. Replace the key and turn on.
4. Ulize the seed chart to determine seed gate seng for
your seed type.
5. Use the arrows (3 & 4) to adjust what seng is displayed.
6. Perform a seed audit over the rst 1,000 sq. . of each new
seed variety to ensure correct coverage.
7. Note: the seed chart is a baseline reference point. Variaons
in seed blends, operator styles, and humidity need to be
accounted for in the seed ow seng.
Display Codes
• “ON” ashes indicated manual mode is on.
• “OF” indicates all modes are o.
• “1-50” number indicates seed ow seng.
• “AU” indicates Auto mode acvated.
• “88” indicates the seed gate is jammed.