Operating Instructions Cont.
Semi-automatic Programming: Defined by a Set Cooking Period
This function is used to cook in a desired time period. First, place the food to be cooked into the oven.
Adjust the oven to the desired cooking function and temperature.
Note: The maximum cooking period is 10 hours.
1 Before setting the cooking period, press the “ ” button until you see “Dur” on the timer screen.
2 Use “+” or “-” button to adjust the cooking period (refer to the instructions for setting the correct time
of day). Press the “ ” button to conrm. The time will then appear on the screen and the symbols
“A” and “ ” will light up on the screen. The oven will now start to operate.
3 At the completion of the set duration, the timer will stop the oven and give an audible warning and the
“A” symbol will begin to ash on the screen.
4 To stop the audible warning, set the cooking function and oven temperature knobs to “0”. Pressing any
button for less than 3 seconds will now stop the audible warning. Press the “ ” button for more than
3 seconds sets the oven to Manual mode again.
Semi-automatic Programming: Defined by a Set Finishing Time
This function is used to cook according to a desired nishing time. First, place the food to be cooked into the
oven. Adjust the oven to the desired cooking function and temperature.
1 Before setting the nished time, press “ ” button until you see “End” on the timer screen.
2 Use “+” or “-” button to adjust nishing time. (Refer to the instructions for setting the correct time of day)
3 Press “ ” button to conrm. The time will then appear on the screen and the symbols “A” and “ ” will
light up on the screen. While doing this, the oven will start to operate.
4 At the completion of the set nishing time, the timer will stop the oven and give an audible warning and
the symbol “A” will begin to ash on the screen.
5 To stop the audible warning, set the cooking function and oven temperature knobs to “0”. Pressing any
button for less than 3 seconds will now stop the audible warning. Press the “ ” button for more than
3 seconds sets the oven to Manual mode again.
Full-automatic Programming
This function is used to cook after a certain period of time, with a certain duration. First, place the food to be
cooked into the oven. Adjust the oven to the desired cooking function and temperature.
1 Press the “ ” button until you see “Dur” on the timer screen. Use “+” or “-” button to adjust cooking
period for the food you wish to cook. Press “ ” button to conrm. The time will then appear on the
screen and the “A” symbol will light up on the screen.
2 Now press the “ ” button until you see “End” on the timer screen. When you see “End” on the timer
screen, use “+” or “-” button to adjust nishing time and then press “ ” button to conrm. The time will
then appear on the screen and the “A” symbol will light up on the screen. Note: the “ ” symbol will not
appear until the time cooking starts. Note: you can set a time of up to 23.59 hours.
4 The oven now will start operating at the time calculated by deducting the cooking period from the set
nishing time, and will stop at the set nishing time.
4 At the completion of the set program, the timer will stop the oven and give an audible warning and the “A”
symbol will begin to ash on the screen.
5 To stop the audible warning, set the cooking function and oven temperature knobs to “0”. Pressing any
button for less than 3 seconds will now stop the audible warning. Press the “ ” button for more than
3 seconds sets the oven to Manual mode again.
Please note: Once full-automatic mode has been set, the time cannot be changed. Changing the time
cancels the automatic program and enters the oven into Manual mode. If you need to reset automatic mode
or need to stop setting the current mode, follow the steps above again.
To Next Page
Loading...
