Getting Started
Quick start guide
The pictorial quick start guide below only contains basic information. For detailed
operating instructions, please read the corresponding content on the following pages
of the manual.
CAUTION!
Please ensure the dryer is properly and securely installed before using it.
Preparation
Plug in Load Close door
Drying
On Select program Select function Start/pause
or default
After drying (after the buzzer has beeped and “0:00” is displayed)
Unplug and Open the door and Pull out Pour out the Clean the filter
switch off power take out the load the container condensate water
1
2 3
2
3
4
5
1
To Next Page
Loading...
