EasyManua.ls Logo

Stirling STR-CD8C - Instructions (Cont.); Speciality Functions: Signal, Anti-crease, My Cycle, Child Lock

Stirling STR-CD8C
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
MODEL: STR-CD8C PRODUCT CODE: 62134 07/2018
Instructions (Cont.)
Signal
The buzzer can be set to “on” or “off”. Use this function to switch off the buzzer.
The default setting is “on”, which means, it beeps in the following situations:
When a speciality button is pressed for an extra function.
When an invalid function is button is pressed, or the program dial is turned during
operation.
When the drying program has finished.
Anti-crease
The ANTI-CREASE function will help minimise creasing of your load. After the selected
drying program has finished, the dryer will continue rotating the drum periodically for
30 minutes (default), or until the door is opened.
Press the ANTI-CREASE button to extend the anti-crease function for up to
120 minutes. You can remove your laundry during the anti-crease phase.
NOTE: The ANTI-CREASE function cannot be selected for the “Cool”, “Refresh” and
“Baby Care” programs.
My cycle
Use this function to define and save your favourite programs you are using frequently.
Rotate the PROGRAM SELECTION dial to select the required drying program.
Set other drying functions with the speciality function buttons. (The delay function
cannot be set in “My Cycle”.)
Press and hold the SPEED DRY button for 3 seconds until the buzzer beeps and the
program details have been saved. On the display, the “My Cycle” icon illuminates.
Rotate the PROGRAM SELECTION dial to the “My Cycle” position to start your
favourite program.
To change the “My Cycle” settings, repeat the first three steps above.
Child lock
This machine incorporates a special child safety lock, which you can set to help prevent
children from unauthorised operation of the dryer.
When the dryer is running, press and hold the ANTI-CREASE and SIGNAL buttons
simultaneously for more than 3 seconds to activate the child lock function.
When the child lock function is set, the display will show the child lock icon and no
button will be effective, except the POWER button.
To unlock the child lock function, press and hold the ANTI-CREASE and SIGNAL
buttons simultaneously for more than 3 seconds.

Other manuals for Stirling STR-CD8C

Related product manuals