14
AUS
AFTER SALES SUPPORT
MODEL: STR-E15BGD PRODUCT CODE: 708548 10/2022
1300 112 534
tempo.org/support
Getting Started (Cont.)
5. Plug the machine into an appropriate electrical outlet, then press the POWER
button. The MENU, DESCALE, SHOT, CUP and START/STOP button will start
to flash. The LCD display will be blank.
6. Press any button (MENU, DESCALE, SHOT or CUPS) to start priming the
circuit. The unit will start pumping water from the coffee outlet and dispensing
water from the steam nozzle.
7. Once the circuit priming is complete, the buttons (MENU, DESCALE, SHOT or
CUPS) will stop illuminating. The power button will then flash to indicate that
the unit is entering the pre-heating stage. When the pre-heating is complete,
the power button will stop flashing and will illuminate. The machine is now
ready for use.
NOTE: This process will be carried out for first time use, when the temperature
setting has been changed, or whenever the machine has been reset to its factory
settings (see page 25).
NOTE: There may be some noise when the machine is pumping water for the first
time. This is entirely normal as the appliance is releasing air from inside the system.
The noise should stop soon.
To Next Page
Loading...
