Stirling STR-E15BDG - Grinding function

15
AUS
AFTER SALES SUPPORT
MODEL: STR-E15BGD PRODUCT CODE: 708548 10/2022
1300 112 534
tempo.org/support
Getting Started (Cont.)
Grinding Function
Using the grinder
1. The two “I” symbol onto base shaft and upper
shaft should be aligned. Rotate the upper shaft
until they are aligned (Fig. 4).
2. Check and make sure the two arrows on the
grinding mill are aligned [
] (Fig. 5).
3. Put the bean hopper to the grinding mill vertically.
Make sure the lock symbol [
] on the bean
hopper aligns with the [ ] symbol onto the
machine top cover (Fig. 5).
Base
shaft
Upper shaft
4. Rotate the bean hopper (Fig. 6)
clockwise to select the grinding level
between 1 (fine) and 15 (coarse). The
numerical level is at the base of the
hopper (Fig. 7) while the description
of the level is at the top (Fig. 8).
Select an appropriate level for your
preferred coffee.
Fig. 4
Fig. 5
Fig. 6
Fig. 8
Fig. 7