EasyManua.ls Logo

Stirling STR-FLW75 - Cleaning Door Seal and Detergent Dispenser

Stirling STR-FLW75
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
MODEL: STR-FLW75 PRODUCT CODE: 62131 07/2018
Other Useful Information (Cont.)
Cleaning the door seal and glass (after each wash)
After each wash:
Wipe the glass and seal to remove lint and stains.
A build-up of lint can cause leaks.
Check for coins, buttons and other small objects in
the seal creases (Fig. 20) and remove them.
Leave the door slightly ajar so the inside can
dry properly. This will also help prevent the
development of mould or odours.
Cleaning the detergent dispenser (when required)
The detergent dispenser may be removed for cleaning (Fig. 21).
Pull open the dispenser drawer and press down the arrow tab (indicated with an the
letter A in Fig. 21-1 below) on the softener cover and pull the drawer out of its space.
Clean the dispenser drawer thoroughly under running water (Fig. 21-2). Clean the
recess with a small brush (Fig. 21-3).
Wipe all parts dry with a clean cloth, then reinstall the drawer back into its space.
NOTE: Do not use any solvents, alcohol, harsh chemicals, alkaline or abrasive
cleaning agents, or sharp objects, to avoid damaging the surface.
Fig. 20
Fig. 21
Pull out the dispenser Clean the dispenser Clean inside the recess Insert the dispenser
by pressing (A). under running water. with a small brush. drawer back into place.

Other manuals for Stirling STR-FLW75

Related product manuals