STMicroelectronics STM32H7 Nucleo-144 User Manual

March 2019 UM2407 Rev 1 1/48
1
UM2407
User manual
STM32H7 Nucleo-144 boards (MB1364)
Introduction
The STM32H7 Nucleo-144 boards based on the MB1364 reference board (NUCLEO-
H743ZI, NUCLEO-H753ZI) provide an affordable and flexible way for users to try out new
concepts and build prototypes, by choosing from the various combinations of performance
and power consumption features provided by the STM32H7 Series microcontroller. The ST
Zio connector, which extends the Arduino™ Uno V3 connectivity, and the ST morpho
headers provide an easy means of expanding the functionality of the Nucleo open
development platform with a wide choice of specialized shields. The STM32H7 Nucleo-144
boards do not require any separate probe as they integrate the STLINK-V3
debugger/programmer. The STM32H7 Nucleo-144 boards come with the comprehensive
free software libraries and examples available with the STM32Cube MCU Package.
Pictures are not contractual.
Figure 1. Nucleo-144 board (top view) Figure 2. Nucleo-144 board (bottom view)
www.st.com

STMicroelectronics STM32H7 Nucleo-144 Specifications

General

Brand	STMicroelectronics
Model	STM32H7 Nucleo-144
Category	Motherboard
Language	English

Summary

Introduction

Features

Ordering Information

Product Marking

Details on evaluation tool markings "ES" or "E" and their implications for usage.

Codification

Explains the coding system used for product order numbers and board references.

Development Environment

Development Toolchains

Lists compatible IDEs such as Keil, IAR, and GCC-based tools for development.

System Requirements

Specifies the required operating systems (Windows, Linux, macOS) and hardware.

Demonstration Software

Information about the preloaded demo software, its source code, and download location.

Conventions

Quick Start

Getting Started

Step-by-step guide for initial board setup, configuration, and running the demonstration.

Hardware Layout and Configuration

Nucleo-144 Board Layout

Top-view layout of the board, detailing component placement and connector identification.

Mechanical Drawing

Physical dimensions and mounting details of the Nucleo-144 board in millimeters and mils.

Embedded STLINK-V3

Details on the integrated STLINK-V3 debugger/programmer features, firmware upgrade, and usage.

Power Supply

Describes various external and internal power supply input options, voltages, and current limits.

Clock Sources

Configuration methods for High-Speed External (HSE) and Low-Speed External (LSE) clock sources.

Board Functions

Explains the functionality of LEDs, push-buttons, MCU voltage selection, and other onboard features.

Solder Bridges and Jumpers

Table detailing the configuration options provided by various solder bridges and jumpers on the board.

Board Connectors

STLINK-V3 USB Micro-B Connector CN1

Pinout and signal assignments for the USB Micro-B connector used for STLINK communication.

USB OTG FS Connector CN13

Pinout and function of the USB OTG FS Micro-AB connector, supporting host and device modes.

Ethernet RJ45 Connector CN14

Pinout and signal assignments for the integrated Ethernet RJ45 connector.

Extension Connectors

ST Zio Connectors

Pin assignments for ST Zio connectors (CN7-CN10), including support for Arduino Uno V3 shields.

ST Morpho Connector

Comprehensive pin assignments for the ST morpho extension headers.

Appendix A: Federal Communications Commission (FCC) and Industry Canada (IC) Compliance

FCC Compliance Statement

Statement regarding compliance with FCC Part 15 rules, including conditions for operation and interference.

IC Compliance Statement

Statement regarding compliance with Industry Canada license-exempt RSS standards and exposure limits.

Appendix B: CISPR32

Revision History