Stobag AIROMATIC PS4500 - Cleaning Coated Components

www.stobag.com
36
Operating instructions
AIROMATIC PS4500 | TARGA PS6000 | PERGOLINO P3500
4�1 Cleaning coated components
Fig. 21: Clean coated components
In order to remove general soiling from all coated
components, proceed as follows:
1. Retract fabric panel  “3.2 Operation” on
page 27.
2. Switch off the fuse for the shade and thereby
cut its power. Secure the fuse against unau-
thorized switching on.
3. Sweep or blow off loose dirt.
4. Moisten the box, guide rails and frame with
clean water from a garden hose.
5. Clean or soak surfaces with warm water and
mild, non-abrasive, environmentally friendly
surface cleaner and a soft cloth.
6. If necessary, wash off dissolved soiling with
clean water and rinse off cleaning agent
completely.