27
www.stobag.com
Operating instructions
AIROMATIC PS4500 | TARGA PS6000 | PERGOLINO P3500
Operating instructions
AIROMATIC PS4500 | TARGA PS6000 | PERGOLINO P3500
3�2 Operation
Operating shade with the remote control
The operating buttons do not have a deadman switch. After press-
ing the UP (retract) / DOWN (extend) button, the fabric
panel travels to the respective programmed final position. Alterna-
tively, by pressing the MY operating button, the fabric panel will
automatically move to a pre-defined position or stop.
For more information on programming the MY button, see the
operating instructions for the remote control.
1. Ensure that the travel path of the fabric panel is clear.
2. Use the channel selection button on the remote control to
select the channel for the respective shade.
Î The diode of the selected channel flashes red.
3. To extend the shade fabric panel, press the DOWN button.
Î The fabric panel extends.
4. To stop the moving fabric panel, press the MY button.
Î The fabric panel stops.
5. Set any position for the fabric panel.
6. To retract the shade fabric panel, press the UP button.
Î The fabric panel retracts.
To Next Page
Loading...