Vacuum switching off:
Machine switched off by thermocouple (caused •
by vacuum ow interruption
blocked, kinked, or sagging suction hose / exces-•
sive water temperature)
Check power supply: the circuit breaker may have •
triggered. Use only 2.5mm² diameter
extension lead. Total length must not exceed 30 •
metes. Completely unwind extension reels.
Bellow air lter below suction unit wet and / or •
soiled
Check if the pump plug is plugged into the suc-•
tion unit (otherwise the water level will rise and
the vacuum ow interrupter will trigger).
Switch motors on individually.•
Attach all machines to different power supplies.•
Check the 230V power supply.•
Set both main switches to "0" position. Remove •
the cause of the malfunction and switch the ma-
chine back on after waiting for approx. 5 min.
Accessories and spares:
Accessories:
Designation Art. No.,
Professional high pressure cleaner 135
bar
65 60 00
Professional high pressure cleaner 220
bar, petrol
65 60 50
Extension suction hose cpl., 10m 65 70 10
Extension high pressure hose, 10 m,
Pressure load up to 400 bar,
65 65 14
max. temperature exposure 150°C
Extension high pressure hose, 10 m, 65 65 30
Incl. dual coupling,
Pressure load up to 210 bar,
max. temperature exposure 150°C
Accessories:
Designation Art No.,
Dual coupling 65 65 31
High pressure hose M 22x1.5
Discharge hose extension 10m 65 70 16
Hose clamps 64 24 25
Cleaning attachment for small surfaces
6x6 cm
65 76 50
Cleaning attachment for large surfaces
44x40 cm
65 75 60
Floor cleaning adapter for large surface
cleaning attachment
65 75 80
Water intake nozzle for water intake 65 10 30
Metal intake tube 1.2 m 65 10 10
Extraction unit spares
Designation Art. No.,
Reusuable mesh lter bag
210 mµ 65 77 30
300 mµ 65 77 31
400 mµ 65 77 32
Coupling for suction hose 65 70 11
Standard cleaning attachment spares:
Designation Art.No.,
Sealing brush set, 4 parts 65 74 18
Roller 65 74 04
Bearings 65 74 05
Bearing journal 65 74 06
Bracket 90 degree 65 71 23
Interchange part jet stream, at stream 65 75 51
Interchange part at stream 65 75 52
Nozzle 0.95 65 74 08
Nozzle 1.27 (with groove) 65 74 19
Pan head screw M 4 x 8 65 74 12
Pan head screw M 5 x 10 65 74 13
Washer A 4.3 61 20 39
Thermometer with adhesive washer 65 75 53
Wide rollers Teon for 65 75 54
Large surface and standard cleaning
attachment
CAUTION:
We recommend the use of the nozzles as provided
with a diameter of 1.27 mm, if the high pressure
cleaner you use delivers more than 11 l water per
minute.
To Next Page
Loading...